Below are 3 ways to access the version 2.2c upgrade file for the TNET 200:

1.) You can connect using Internet Explorer via the link below:

ftp://firmware22c:firmware22c@files155.cyberlynk.net

This will allow for dragging/dropping capabilities on any windows machine.


2.) You can also connect to the FTP server using any standard FTP Client such as FTPVoyager, WSFTP, or CuteFTP. To connect using your FTP Client use the settings below.

FTP Host:  files155.cyberlynk.net
Username:  firmware22c
Password:  firmware22c

If you do not have an FTP client you can purchase or download a FREE trial copy via the link below:

http://www.ftpclientlisting.com


3.) You can also use the Web Based JAVA FTP Client from any Windows computer:

http://files155.cyberlynk.net/client

Username:  firmware22c
Password:  firmware22c

TNET 200 Firmware upgrade Instructions

Requirements

• TNET 200 version 2.0 or greater
• TNET 200 firmware update file on you PC named “upgrade.tar”

Instructions

1. From the TNET 200 browser control page, go to Configuration>Advanced Settings>upload upgrade file.   An empty folder window should open on your PC.   Depending on the configuration of the computer you are using to access the TNET 200, it could take 20 seconds for the FTP window to open.
2. Copy the “upgrade.tar” file to the folder.   When the file has been copied to the folder, close the window.
3. From the TNET 200 browser control page, go to the Configuration page and click on the “Restart button”
4. This restart will take longer as the TNET 200 updates the firmware.
5. After the upgrade is completed, the TNET-200 will automatically reboot and revert back to the default IP address of 192.168.0.10.  The IP address of the computer that is being used to access the TNET 200 will need a static IP address.    The network must not already have a device with the 192.168.0.10 IP address.